Overview:
EIGRP သည်
Cisco က ထုတ်ပေးထားသော Advanced Distance-Vector အမျိုးအစား Routing Protocol တစ်ခုဖြစ်သည်၊
နောက်တစ်မျိုး အနေနဲ့ Hybrid Routing Protocol လို့လဲခေါ်ဆိုနိုင်ပါသည်။ Distance
Vector Routing Protocol နှင့် Link State Routing Protocol နှစ်ခုတို့ရဲ့ အကောင်းဆုံးအချက်တွေကို
ပေါင်းစပ်ထားခြင်းဖြစ်ပါတယ်။ အစောပိုင်းကာလများတွင် Cisco Device များပေါ်တွင်သာ အသုံးပြုခွင့်ရှိပြီး
2013 ခုနှစ်မှစတင်ကာ Open Standard အနေနဲ့ အခြား device များမှာပါ အသုံးပြုနိုင်အောင်
Cisco က published လုပ်ပေးထားပြီ ဖြစ်ပါတယ်။
Protocol Nunmber 88
Protocol Nunmber 88
EIGRP က Neighbors Router တွေကို အချက်အလက် တွေပို့တဲ့အခါ
Multicast သို့မဟုတ် Unicast ကိုသုံးပါတယ်။ နောက်ပြီးတော့ EIGRP သည် IGP (interior
Gateway Protocols) ဖြစ်သောကြောင့် AS (Autonomous System) တူမှသာရပါမယ် မတူရင် Neighbors
Up မဖြစ်ပါဘူး။ AS number မတူတာကို ချိတ်ချင်ရင်တော့ Redistribution လုပ်ပေးရမည် ဖြစ်ပါသည်( Routing
inside (Within) autonomous system)။ နောက်တစ်ချက်အနေနဲ့ EIGRP သည် K Values မတူရင်လည်မရပါ။
EIGRP သည် DUAL (Diffusing Update Algorithm) ကိုသုံးပြီးတော့ အလုပ်လုပ်တာဖြစ်ပါတယ်။ Router အလုံးအရေအတွက်
၂၂၄ လုံးအထိချိတ်လို့ရသည်။
DUAL (Diffusing Update Algorithm) ဆိုတာဘာလဲ?
Diffusing
Update Algorithm ဆိုတာက Convergence Time ကိုမြန်အောင် အတွက်ပြုလုပ်ပေးသော
Algorithm တခုဖြစ်ပါသည်။ DUAL ကို Cisco ရဲ့ Routing Protocol တစ်ခုဖြစ်တဲ့ EIGRP တွင်
Routing loop တွေမဖြစ်အောင် ကာကွယ်ပေးရန်အတွက်နဲ့ Route (လမ်းကြောင်း) တွေကို တွက်ချက်ပေးရန်
အတွက်သုံးတဲ့ Algorithm တခုလည်းဖြစ်ပါတယ်။ DUAL ကို နောက်တစ်မျိုး အနေနဲ့ DUAL
Finite-State Machine (DUAL FSM) လို့လဲ ခေါ်ပါတယ်။ DUAL သည် Routing
Loop မဖြစ်နိုင်တဲ့ အကောင်းဆုံး လမ်းကြောင်းတွေ ကို Topology Table မှာ သွားသိမ်းပေးပါသည်။
Characteristics of EIGRP
EIGRP ရဲ့ထူးခြားချက်တွေက?
- Fast Convergence!
Convergence
Time ဆိုတာက Route (လမ်းကြောင်း) တစ်ခု Failure ဖြစ်သွားရင် အဲ့ Route Down သွားတဲ့
အချိန်နဲ့ Backup Route (လမ်းကြောင်း) ပေါ်ြပန်ရောက်တဲ့ အချိန် အဲ့ အချိန် ၂ခုကြားက
ကြာချိန်ကို ပြောခြင်းဖြစ်ပါသည်။
- Load Balancing over unequal cost links
- Classless (VLSM Support)
- Communicates via Multicast 224.0.0.10, FF02::A
- Multiple network layer protocols are support
EIGRP
သည် TCP/IP သာမက Multiple protocol (eg.IPX/SPX, Apple talk) တို့ကိုလဲ support လုပ်ပါသည်။
EIGRP Basic
Components
EIGRP က ဘယ်လို အလုပ် လုပ်လဲ?
EIGRP က ဘယ်လို အလုပ် လုပ်လဲ?
- Neighbor Discovery
- Reliable Transport Protocol (RTP)
- Diffusion Update Algorithm (DUAL)
- Protocol Dependent Modules
EIGRP
Data Structures
EIGRP က
Routing အချက်အလက်တွေကို ဘယ်လို သိမ်းလည်း ?
EIGRP သည်
Routing အချက်အလက် တွေကို သိမ်းဆည်းရာမှာ Table ၃ခုနဲ့ သိမ်းပါသည်။
- Neighbor Table (Show ip eigrp neighbor)
- Topology Tabel (Show ip eigrp topology)
- Routing Table (Show ip route)
Neighbor
Table
EIGRP သုံးတဲ့
Router တခုရဲ့ Neighbor Table မှာတော့ သူ့ရဲ့ဘေးချင်းကပ် Router (Adjacent Router)
များရဲ့ အချက်အလက်များကိုသိမ်းပါတယ်။ Neighbor Table ကို ကြည့်တဲ့ Command က - Show
ip eigrp neighbor ၊ ဒီ Command
နဲ့စစ်လိုက်ရင် အောက်က အချက်အလက်တွေကို မြင်ရမှာ ဖြစ်ပါတယ်။
R1#show ip eigrp neighbors
IP-EIGRP neighbors for process 100
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
1 10.1.12.2 Fa0/0 12 00:01:21 60 360 0 16
0 10.1.13.2 Fa0/1 12 00:01:21 50 300 0 16
IP-EIGRP neighbors for process 100
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
1 10.1.12.2 Fa0/0 12 00:01:21 60 360 0 16
0 10.1.13.2 Fa0/1 12 00:01:21 50 300 0 16
Topology
Table
Topology
table မှာတော့ ဘေးချင်းကပ် Neighbor Router များအားလုံးက ကြေညာတဲ့ Route
Destinations များ လမ်းကြောင်းများအားလုံးကို လေ့လာပြီး သိမ်းဆည်းပေးပါတယ်။ Routing Table နဲ့မတူတာကတော့
Topology Table ကရှိသမျှ Route အားလုံးကိုမသိမ်းပဲ EIGRP က တွက်ချက်ပေးထားတဲ့ Route လမ်းကြောင်းများကိုသာ
သိမ်းဆည်း ထားတာပါ။ နောက်ပြီးတော့ Topology Table မှာ သိမ်းဆည်း ထားတဲ့ လမ်းကြောင်းတခုစီကို
Metric တန်ဖိုး၊ Advertised Distance (AD) တန်ဖိုး၊ Feasible Distance (FD) ၊ Seccessor
၊ Feasible Seccessor များနဲ့ တွဲမှတ်ထားပါတယ်၊
Metric
A routing protocol-specific measurement of how far a remote network is form a router.
Advertised Distance (AD)
The Cost
from the neighbor to the destination.
Feasible Distance (FD)
The sum of
the AD plus the cost between the local router and then next hop router.
Successor
The
primary route used to reach a destination. The successor route is kept in the
routing table. Noticed that successor is the best route to that destination.
Feasible Successor (FS)
The backup
route . To be a feasible successor, that route much have an AD less than the FD
of the current successor route.
Topology Table ကိုစစ်တဲ့ Command က - show ip eigrp topology
R1#show ip eigrp topology
IP-EIGRP Topology Table for AS(100)/ID(1.1.1.1)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status
P 4.4.4.4/32, 1 successors, FD is 2300416
via 10.1.12.2 (2300416/2297856), FastEthernet0/0
P 2.2.2.2/32, 1 successors, FD is 158720
via 10.1.13.2 (158720/156160), FastEthernet0/1
via 10.1.12.2 (181760/128256), FastEthernet0/0
P 5.5.5.5/32, 1 successors, FD is 2300416
PDF File နဲ့လိုချင်သူများ Contact form for Alvin မှာ email address ချန်ထားခဲ့ နိုင်ပါတယ်..
အလုပ်တစ်ဖက်နဲ့မို့ အားတဲ့ချိန်လေး စာလုပ်ရင်း ဆက်ရေးပါဉီးမည်။
လေးစားစွာဖြင့်...
IP-EIGRP Topology Table for AS(100)/ID(1.1.1.1)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status
P 4.4.4.4/32, 1 successors, FD is 2300416
via 10.1.12.2 (2300416/2297856), FastEthernet0/0
P 2.2.2.2/32, 1 successors, FD is 158720
via 10.1.13.2 (158720/156160), FastEthernet0/1
via 10.1.12.2 (181760/128256), FastEthernet0/0
P 5.5.5.5/32, 1 successors, FD is 2300416
EIGRP
Metric Calculation
EIGRP က (Route)
လမ်းကြောင်းတွေကို ဘယ်လိုတွက်ချက်လဲ?
K value တန်ဖိုး ၅ခု နဲ့ တွက်ချက်ပါတယ်-
Component
|
Description
|
|
K1
|
Bandwidth
|
Lowest bandwidth of route
|
K2
|
Load
|
Worst load on route based on packet rate
|
K3
|
Delay
|
Cumulative interface delay of route
|
K4
|
Reliability
|
Worst reliability of route based on keep alive
|
K5
|
MTU
|
Smallest MTU in path [Not used in route calculation]
|
EIGRP Metric
တွက်ရန် ပုံသေနည်း-
Metric = [
(10,000,000/Min.BW) + (sum of interface Delays/10) ] *256
K Value စစ်တဲ့
command က - show ip protocol
R4#show ip
protocol
Routing
Protocol is "eigrp 100"
Outgoing update filter list for all
interfaces is not set
Incoming update filter list for all
interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming
updates
EIGRP metric weight K1=1, K2=0, K3=1, K4=0,
K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
Redistributing: eigrp 100
EIGRP NSF-aware route hold timer is 240s
Automatic network summarization is not in
effect
Maximum path: 4
Routing for Networks:
4.4.4.4/32
10.1.24.0/30
Routing Information Sources:
Gateway
Distance Last Update
10.1.24.1 90 00:43:12
Distance: internal 90 external 170
Parameters
that should match between EIGRP neighbor
EIGRP
neighbor router တွေကြားမှာ တူညီရမယ့် အချက်တွေက?
- Autonomous System (AS) numbers
- K Values
- Authentication Credentials (if any)
- Subnet and Subnet Mask
EIGRP Basic Configuration and Verification Command
EIGRP မှာ အသုံးပြုမဲ့
အခြေခံ Command များက?
EIGRP for IPv4
Configuration
Router (config) #
router eigrp 1
Router
(config-router) # network (network) (Wildcast Mask)
Ipv4 Verification
Router # show ip
eigrp interfaces
Router # show ip
eigrp neighbors
Router # show ip
eigrp topology
Router # show ip
router
Router # show ip
eigrp topology
all-links
Router
# show ip protocols
EIGRP for IPv6
Configuration
Router (config) #
ipv6 multicast-routing
Router (config) #
ipv6 router eigrp 1
Router
(config-router) # interface fastethernet 0/0
Router (config-if) #
ipv6 eigrp 1
Ipv6 Verification
Router # show ipv6
route
Router # show ipv6
route eigrp
Router # show ipv6
protocols
Router # show ipv6
eigrp neighbor
Router # show ipv6
eigrp interfaces
Router # show ipv6
eigrp interfaces detail
Router # show ipv6
eigrp topology
Router # show ipv6
eigrp topology all-links
PDF File နဲ့လိုချင်သူများ Contact form for Alvin မှာ email address ချန်ထားခဲ့ နိုင်ပါတယ်..
အလုပ်တစ်ဖက်နဲ့မို့ အားတဲ့ချိန်လေး စာလုပ်ရင်း ဆက်ရေးပါဉီးမည်။
လေးစားစွာဖြင့်...
ALvin

Pdf plz. mularhehhtoo@gmail.com
ReplyDeletenyeinchanoo.phk@gmail.com
ReplyDelete